Micron stainless steel wire mesh is a surface-filter type media. It is made by weaving specific wire in predetermined patterns to form apertures of different shapes and sizes. Plain square, twilled square, plain dutch, and twilled dutch are common weave patterns available.
Muti-layers micron metal mesh is sintered by two or more layers(2~12layers) of stainless steel wire mesh, which are compressed and sintered together in vacuum. Its micron rating ranges from 0.5micron to 300micron
Micron Stainless Steel Wire Mesh Material: stainless steel wire 201,202,304,304L, 316,316L, 321, 430, etc
Standard roll width: 1m to 48"
Standard roll length: 30m to 100"
Advantages of Stainless Steel Wire Mesh
Wear-resistant, high strength and long service life, unity-structure, not curly, easy to use, acid-resistant , alkali-resistant, corrosion-resistant, heat-resistant
Materials of Stainless Steel Wire Mesh is mainly divided into 304,304 L,316 , 316 L.
| Type |
Features |
| SS304 |
Type 304 is often referred to as "18-8" ( 18% chromium, 8% nickel ) with the basic stainless alloy mostly commonly, utilized for wire cloth weaving.
It withstands outdoor exposure without rusting
resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit.
|
| SS304L |
Type 304 L is very similar to T-304
the difference being the reduced carbon content for better weaving and secondary welding characteristics.
|
| SS316 |
Stabilized by the addition of 2% molybdenum, T-316 is an "18-8" alloy. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304. |
| SS316L |
Type 316 L is very similar to T-316, the difference being the reduced carbon content for wire cloth weaving and secondary welding characteristics |
Weaving pattern:
1.Metal Mesh offers them in a wide range of specifications
| Stainless Steel Wire Mesh Specification Table |
| Mesh/inch |
Wire Dia. (MM) |
Opening (MM) |
Material (AISI) |
| 6x6 |
0.89 |
3.35 |
SS304 ,SS304LorSS316,SS306L |
| 8x8 |
0.71 |
2.46 |
SS304 ,SS304LorSS316,SS306L |
| 10x10 |
0.51 |
2.03 |
SS304 ,SS304LorSS316,SS306L |
| 12x12 |
0.508 |
1.6 |
SS304 ,SS304LorSS316,SS306L |
| 16x16 |
0.457 |
1.13 |
SS304 ,SS304LorSS316,SS306L |
| 18x18 |
0.432 |
0.98 |
SS304 ,SS304LorSS316,SS306L |
| 20x20 |
0.406 |
0.86 |
SS304 ,SS304LorSS316,SS306L |
| 30x30 |
0.305 |
0.54 |
SS304 ,SS304LorSS316,SS306L |
| 35x35 |
0.3 |
0.56 |
SS304 ,SS304LorSS316,SS306L |
| 40x40 |
0.23 |
0.4 |
SS304 ,SS304LorSS316,SS306L |
| 50x50 |
0.229 |
0.28 |
SS304 ,SS304LorSS316,SS306L |
| 60x60 |
0.178 |
0.25 |
SS304 ,SS304LorSS316,SS306L |
| 70x70 |
0.16 |
0.24 |
SS304 ,SS304LorSS316,SS306L |
| 80x80 |
0.14 |
0.18 |
SS304 ,SS304LorSS316,SS306L |
| 90x90 |
0.12 |
0.16 |
SS304 ,SS304LorSS316,SS306L |
| 100x100 |
0.114 |
0.14 |
SS304 ,SS304LorSS316,SS306L |
| 110x110 |
0.1016 |
0.1295 |
SS304 ,SS304LorSS316,SS306L |
| 120x120 |
0.094 |
0.1168 |
SS304 ,SS304LorSS316,SS306L |
| 150x150 |
0.066 |
0.1041 |
SS304 ,SS304LorSS316,SS306L |
| 160x160 |
0.0635 |
0.965 |
SS304 ,SS304LorSS316,SS306L |
| 180x180 |
0.0584 |
0.0838 |
SS304 ,SS304LorSS316,SS306L |
| 200x200 |
0.0533 |
0.0737 |
SS304 ,SS304LorSS316,SS306L |
| 250x250 |
0.0406 |
0.061 |
SS304 ,SS304LorSS316,SS306L |
| 300x300 |
0.0381 |
0.0457 |
SS304 ,SS304LorSS316,SS306L |
| 325x325 |
0.0356 |
0.0432 |
SS304 ,SS304LorSS316,SS306L |
| 350x350 |
0.03 |
0.042 |
SS304 ,SS304LorSS316,SS306L |
| 400x400 |
0.0254 |
0.037 |
SS304 ,SS304LorSS316,SS306L |
| 450x450 |
0.028 |
0.028 |
SS304 ,SS304LorSS316,SS306L |
| 500x500 |
0.0254 |
0.0254 |
SS304 ,SS304LorSS316,SS306L |
| 635x635 |
0.0203 |
0.0203 |
SS304 ,SS304LorSS316,SS306L |
2,Plain Dutch and Twill Dutch Weave Wire Mesh
Dutch weaves produce a tighter mesh, with superior filtration capabilities.
Plain Dutch Weave Wire Mesh
| Mesh/Inch |
Wire Diameter |
Absolute Filtration Fineness µm |
Nominal Filtration Fineness µm |
| 8x85 |
0.014x0.0126 |
318-340 |
250-255 |
| 12x64 |
0.024x0.0165 |
270-285 |
200-205 |
| 14x88 |
0.020x0.013 |
225-245 |
150-155 |
| 20x150 |
0.0098x0.007 |
155-165 |
100-105 |
| 24x100 |
0.015x0.010 |
115-125 |
80-85 |
| 30x150 |
0.009x0.007 |
95-100 |
65-70 |
| 40x200 |
0.007x0.0055 |
65-70 |
55-60 |
| 50x250 |
0.0055x0.0045 |
55-60 |
40-45 |
| 80x400 |
0.0049x0.0028 |
43-48 |
35-40 |
Twill Dutch Weave Wire Mesh
| Mesh/Inch |
Wire Diameter |
Absolute Filtration Fineness µm |
Nominal Filtration Fineness µm |
| 20x250 |
0.0098x0.0079 |
110-120 |
98-105 |
| 30x360 |
0.0098x0.0060 |
90-100 |
80-84 |
| 40x560 |
0.0070x0.0040 |
70-75 |
47-52 |
| 120x400 |
0.0040x0.0025 |
50-55 |
37-43 |
| 120x160 |
0.0040x0.0025 |
40-45 |
28-32 |
| 80x700 |
0.0040x0.0030 |
35-40 |
24-26 |
| 200x600 |
0.0024x0.0018 |
28-32 |
19-21 |
| 165x800 |
0.0028x0.0020 |
24-26 |
14-16 |
| 165x1400 |
0.0028x0.0016 |
16-18 |
9-11 |
| 200x1400 |
0.0028x0.0016 |
12-14 |
5-6 |
| 250x1400 |
0.0022x0.0016 |
11-12 |
3-4 |
| 325x2300 |
0.0015x0.0010 |
8-9 |
2-3 |
3,Reverse Plain Dutch Weave & Twilled Reverse Dutch Weave Wire Mesh
Reverse Dutch weaves are used for high pressure filtration applications. This type of pattern is used in the food and beverage industry, plastics, aerospace, petrochemical and chemical applications.
Micron stainless steel wire mesh can be used in the following fields
- electroplating industry for pickling mesh, printing mesh
- scientific research and transportation industries
- widely used in aerospace, petroleum, chemical industry
- battery industry and a variety of sophisticated filtration products
Product Tags:
|
|
High Toughness 30 Micron Stainless Steel Mesh , Stainless Steel Fine Mesh Screen Images
|
